1. Fishing with empty pole is unavoidable, but the action of pole lifting can be designed. If lifting the rod can avoid vertical upward, so that the falling hook can't touch the fishing line, wouldn't it be less likely for the hook line to twist? Therefore, when lifting the rod, the fishing rod deflects slightly to the left or right, which is estimated to be 15~20 degrees. This deflection can not only reduce the entanglement of the hook line, but also avoid the big fish from stirring up the Yellow dens after being hit by the fish. In addition, when lifting the rod, the force should not be too large, just add a little force. Generally, the fish can't get out of the water, so that even if the rod is lifted empty, the hook won't entangle the fishing line. After skilled use of these standardized action designs, it is not only helpful for more fishing, but also effectively prevent the entanglement of the fishing line.
2. Line group transformation: the first is the air line. The wind line should not be long. If it is too long, it will not only fail to grasp the best time to lift the pole, but also it is very easy to mess the line. Generally speaking, the length of the wind line should be 50~60 cm from the water surface. For example, if the water depth is 100 cm, only 150~160 cm of fishing line is enough. I'm talking about the general situation, but if the head of the fish pond is large, should we use a long line or should we use a long line? For example, if the water surface of the fish pond is too high offshore and the drop is large, it is natural to use a long line to catch big fish.
Most fishing friends who use traditional hand pole fishing are from one line to the hook, which is unscientific. Hanging fishing is a combination of main line and sub line. The main line is thick and the sub line is thin. For example, the diameter of the main line is 0.2mm, the sub line can be 0.16mm, or even 0.12mm. Such a combination has many advantages. For example, the hook and the peduncle can discard the sub line and the hook at most, which can play a good role in protecting the main line and the fishing rod. It is also convenient to replace the wire hook. Several more sets of sub wire hook groups can be prepared. If the sub wire is broken, use the spare sub wire bolt. According to statistics, it takes only 10 seconds to change a fishing line. If it is not combined in this way, it often takes a lot of effort to change a fishing line, let alone re tie the hook.
3. If you find that the fishing line is entangled when lifting the rod, you should not be impatient at this time, do not hold the rod too much, try to make the fishing rod stable, control the rod tip not to shake, and carefully pull back the fishing rod, so as to reduce the probability of entanglement of the fishing line, which is of great benefit to untie the entangled fishing line.
